Info
DOUBLE.JET is a double machining center with 6+6 interpolated and numerically controlled axes, equipped with an automatic
loading/unloading system.
DOUBLE.JET may be equipped with either 1 or 2 automatic hopper feeders designed to ensure the best possible ergonomic conditions.
Technical data
|
Interpolated axes |
N. 6+6 |
|
Loader axis |
N. 2 |
|
Longitudinal X axis |
1,700 / 2,400 / 2,950 mm |
|
Transversal Y axis |
1,300/1,800 mm |
|
Vertical Z axis |
650 mm |
|
A axis |
Unlimited |
|
B axis |
260° |
Table
ADJUSTABLE CLAMPS
Pneumatic clamps that clamp from the bottom upwards, with adjustable height and tiltable reference stops, making it possible to adjust the system to the shape of the piece being machined without the need for jigs. Extremely sturdy and with a double stem (30mm diam.) to ensure efficient clamping action even during operations that entail the removal of large amounts of material. The clamps slide in the horizontal X direction and the vertical Z direction on linear guides, with semi-automatic positioning controlled by the Pitagora software.
These clamps combined with the automatic loaders are protected by the Bacci “Double reference system” and “Synchronized loading/unloading” patents.
Table
AUTOMATIC NC CLAMPS POSITIONING
Numerically controlled automatic clamps positioning in the horizontal X and vertical Z directions (Bacci Patent) on linear guides drastically reduces set-up time.
Table
REMOVABLE TGV TABLES
In addition to feeding by means of automatic hopper feeders, the machine may also be optionally equipped with 2 or more removable TGV rails (variable geometry table) , to hold pieces using vacuum suction or pneumatic clamps (manual loading). This optional device is ideal for 5 axes machining of all pieces that cannot be loaded automatically, increasing machining center efficiency and flexibility.
Heads
T2 HEAD TYPE
A single fork holding a double-exit spindle with compact dimensions. Typically used for machining that does not require numerous tools (2 maximum), for example for machining wood shells or milling plastic components after pressing.
Heads
T2+2 HEAD TYPE
A single fork holding two double-exit electric spindles placed in cross position and extremely compact. The opposite exits of the same spindle rotate in opposite directions.
Charger
AUTOMATIC LOADER/UNLOADER
The Bacci patent (synchronized loading/unloading) allows for rapid feeding of the machining center, thereby contributing to its extremely high productivity. Machined pieces are unloaded on guides (supports) positioned at a height of 1,200 mm from the ground, ensuring the full ergonomics of piece recovery. Max. section of automatically loaded pieces 100x60mm (different on request). The hopper feeder magazines slide on linear guides for easy parking outside the work area in case of manual loading.
Charger
DOUBLE REFERENCE SYSTEM
The double reference system (a Bacci patent) is made by a combination of stops and pneumatic pushers located in the hopper feeder and on the clamps, which make it possible to decide which piece reference surface to use at each work cycle.
For this reason, the double reference system (a Bacci patent) allows machining right and left elements with a single setup of the clamps. Therefore, clamps set-up need be carried out only once for right and left elements.
